Weight: 507gFeatures 2-layer GORE-TEX, GUARANTEED TO KEEP YOU DRY™ Two zippered hand pockets and one zippered chest pocket Aquaguard vislon center-front zipper Adjustable hood Velcro-adjustable cuffs Adjustable bottom hem Standard fit Materials GORE-TEX plain weave 2L, With ePE laminate 100% Recycled Polyester, 75 Denier, Hydrostatic Head:28.000mm Water Permeability RET:13 PFAS-free DWR, 100g/m2, Bluesign® approved., Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved., Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved. Woven fabric, 100% Polyamide, PFAS-free DWR, 134 g/m², bluesign® approved.
Weight: 507gFeatures 2-layer GORE-TEX, GUARANTEED TO KEEP YOU DRY™ Two zippered hand pockets and one zippered chest pocket Aquaguard vislon center-front zipper Adjustable hood Velcro-adjustable cuffs Adjustable bottom hem Standard fit Materials GORE-TEX plain weave 2L, With ePE laminate 100% Recycled Polyester, 75 Denier, Hydrostatic Head:28.000mm Water Permeability RET:13 PFAS-free DWR, 100g/m2, Bluesign® approved., Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved., Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved. Woven fabric, 100% Polyamide, PFAS-free DWR, 134 g/m², bluesign® approved.
Mens Alto Guide HS Hooded Jacket
Weight: 480 gFeatures 3-layer Mammut DRY Tour laminate for dependable weather protection 100% recycled nylon face fabric Helmet-compatible 1-way adjustable hood with reinforced peak Water-repellent 2-way front zipper Zippered chest pocket 2 backpack and climbing-harness-compatible zipper pockets Underarm zipper for additional ventilation Pre-shaped sleeves with hook and loop fastener Hem width can be adjusted with drawstring Water column: 20000 mm Breathability: 20.000 g/m²/24h Material and Construction Denier (main material): 40Dx40D Main Fabric 1 (B2B): 3L Mammut DRY Tour Backing (B2B): 100% polyester Lining 1 - Face Material (B2B): 100% recycledPolyester Membrane (B2B): 100% polyurethane Main Fabric 1 - Face Material (B2B): 100% polyamide (recycled) Fair Wear bluesign® PRODUCT PFC-free DWR Recycled
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Windproof fabric Alpine-style design with secure-zip hand pockets Attached, adjustable, three-piece hood with a drawcord and cord locks Storm flap with a hook-and-loop closure covers the centre front zip Encased-elastic cuffs Internal cinch-cord with a cord lock at the hem for adjustability Heat transfer logo on the left chest and back-right shoulder Materials & Construction Fabric - Body | 111 G/M², DryVent™ 2L—100% Recycled Nylon Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Body Lining | 50 G/M², 100% Recycled Polyester Mesh Fabric - Hood, Sleeve & Pocket Lining | 66 G/M², 100% Recycled Polyester Taffeta Centreback | 73,66 cm
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Windproof fabric Alpine-style design with secure-zip hand pockets Attached, adjustable, three-piece hood with a drawcord and cord locks Storm flap with a hook-and-loop closure covers the centre front zip Encased-elastic cuffs Internal cinch-cord with a cord lock at the hem for adjustability Heat transfer logo on the left chest and back-right shoulder Materials & Construction Fabric - Body | 111 G/M², DryVent™ 2L—100% Recycled Nylon Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Body Lining | 50 G/M², 100% Recycled Polyester Mesh Fabric - Hood, Sleeve & Pocket Lining | 66 G/M², 100% Recycled Polyester Taffeta Centreback | 73,66 cm
Weight: 640g Features GORE-TEX keeps you dry, while letting your sweat escape. Add a midlayer in a snap. Well, a zip. Two hand pockets to keep your fingers toasty and your items safe. Single-point hood adjustment so you can easily adapt to changing weather. A dropped hem at the back keeps your bum dry. Water-resistant zip helps stop the rain creeping in. Materials BODY: 100% POLYESTER WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE MEMBRANE LINING: 100% POLYESTER
Weight: 623gFeatures Waterproof and breathable Adjustable full-coverage hood with brim Two zippered hand pockets Draw-cord adjustable bottom hem Velcro-adjustable cuffs Brushed chin guard Zipper placket Standard fit Recommended For: Lifestyle Materials PROOF 2L plain weave, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 150g/m2, bluesign® approved, Knitted mesh, 100% Recycled Polyester, 70g/m2, Bluesign® approved., Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved, Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved
Weight: 623gFeatures Waterproof and breathable Adjustable full-coverage hood with brim Two zippered hand pockets Draw-cord adjustable bottom hem Velcro-adjustable cuffs Brushed chin guard Zipper placket Standard fit Recommended For: Lifestyle Materials PROOF 2L plain weave, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 150g/m2, bluesign® approved, Knitted mesh, 100% Recycled Polyester, 70g/m2, Bluesign® approved., Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved, Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved
Mens Carto Mono Triclimate Hooded Jacket
Features and Benefits Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Circular design - This item is part of our Circular Design initiative – a collection designed to help regenerate natural systems by minimising waste and pollution. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. Circular Design: thoughtfully designed to be disassembled and recycled by us at the end of its life into raw materials for a second generation of products Outer and inner have Triclimate® loops and snaps for snap-in compatibility Outer jacket: DryVent™ Mono delivers seam-sealed, waterproof protection in a mono-material construction that’s designed to be recycled by us and put back into the supply chain Outer jacket: Non-PFC DWR finish for added water repellency Outer jacket: Attached, adjustable hood with a cinch cord with cord locks in the front and back Outer jacket: Adjustable hook-and-loop cuff tabs Outer jacket: Embroidered logo on the left chest and back-right shoulder Inner jacket: Wind-resistant WINDWALL™ fabric Inner jacket: Non-PFC DWR finish for added water repellency Inner jacket: Heatseeker™ synthetic insulation is made with hollow-core fibres for added warmth, performance and durability Inner jacket: Secure-zip hand pockets Inner jacket: Embroidered logo on the left chest Fabric and Materials Fabric - Outer Body | 123 G/M², DryVent™ Mono 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish $$ Fabric - Outer & Inner Lining | 66 G/M², 100% Recycled Polyester Fabric - Outer Pocket Lining | 90 G/M², 100% Recycled Polyester $$ Fabric - Inner Body | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish $$ Inner Insulation | 100 g Heatseeker™—70% Post-Consumer Recycled Polyester $$ Centreback | 76,2 cm Technology Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Heatseeker™ - Synthetic Heatseeker™ insulation delivers exceptional warmth without the bulk. It is highly durable and compressible – ideal for packing into backpacks and luggage. Windwall™ - WindWall™ fabrics are engineered to reduce the effects of chilling winds while maintaining a good level of breathability.
Weight: 455gFeatures 3-layer GORE-TEX 75D recycled polyester is a good mix of durability and soft touch Grown on, fully adjustable hill hood with a wired peak and roll away tab feature 2-way YKK® centre front zip with double storm guard 2 zipped hand pockets, one inner zipped stretch softshell pocket Adjustable cuffs Adjustable split hem drawcords Materials 100% recycled polyester, ePTFE membrane Gore-Tex: This fabric is designed to provide superior comfort and durable waterproof protection in a wide range of outdoor activities.
Weight: 455gFeatures 3-layer GORE-TEX 75D recycled polyester is a good mix of durability and soft touch Grown on, fully adjustable hill hood with a wired peak and roll away tab feature 2-way YKK® centre front zip with double storm guard 2 zipped hand pockets, one inner zipped stretch softshell pocket Adjustable cuffs Adjustable split hem drawcords Materials 100% recycled polyester, ePTFE membrane Gore-Tex: This fabric is designed to provide superior comfort and durable waterproof protection in a wide range of outdoor activities.
Weight: 690gFeatures 2L GORE-TEX ePE fabric is waterproof and breathable, and is PFAS-free for a reduced carbon footprint. A double storm flap on the centre front zip provides additional protection from wet weather. Two lower zipped pockets and a zipped internal map pocket provide plenty of storage for walking essentials. Fully adjustable hood, for versatility and to maximise protection when needed most. Rollaway hood has a brushed fleece lining at the collar for added comfort. Drawcords at waist and hem allow for a bespoke and comfortable fit, as part of a layering system. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. InterActive front zip is compatible with all Berghaus InterActive midlayer jackets. With more than 75% recycled content and more than 90% bluesign® APPROVED fabric, this product meets our MADE KINDER criteria which helps ensure that our gear is more responsibly made. Centre Back Length - 85cm Hydrostatic Head - 28,000mm Breathability Rating - 20 (RET) Main 1 Denier - 75D Fabric and Construction BODY: 100% POLYESTER WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE LAMINATE LINING: 100% POLYESTER / MESH LINING: 100% POLYESTER
Weight: 690gFeatures 2L GORE-TEX ePE fabric is waterproof and breathable, and is PFAS-free for a reduced carbon footprint. A double storm flap on the centre front zip provides additional protection from wet weather. Two lower zipped pockets and a zipped internal map pocket provide plenty of storage for walking essentials. Fully adjustable hood, for versatility and to maximise protection when needed most. Rollaway hood has a brushed fleece lining at the collar for added comfort. Drawcords at waist and hem allow for a bespoke and comfortable fit, as part of a layering system. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. InterActive front zip is compatible with all Berghaus InterActive midlayer jackets. With more than 75% recycled content and more than 90% bluesign® APPROVED fabric, this product meets our MADE KINDER criteria which helps ensure that our gear is more responsibly made. Centre Back Length - 85cm Hydrostatic Head - 28,000mm Breathability Rating - 20 (RET) Main 1 Denier - 75D Fabric BODY: 100% POLYESTER WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE LAMINATE LINING: 100% POLYESTER / MESH LINING: 100% POLYESTER
Weight: 769g WATERPROOF GUARANTEED - GORE-TEX® Storm-level construction is guaranteed to be waterproof and is fully breathable. A double storm flap on the centre-front zip increases protection. COMBINE WITH EASE - Addition of an InterActive zip means you can combine the Cornice with one of Berghaus InterActive fleece jackets for extra warmth in the depths of winter. WET WEATHER PROTECTION - Adjustable hood offers enhanced wet weather protection and can be neatly rolled away when not in use. Keep essentials close at hand with three useful pockets, including a zippered map pocket. Elasticated, adjustable cuffs and dual drawcord hem help you find your perfect fit.
Mens Crater Pro HS Hooded Jacket
Weight: 508gFeatures Lightweight, durable 3-layer GORE-TEX Pro fabric with a PFC-free ePE membrane for waterproof, windproof, breathable and abrasion-resistant performance 100% recycled nylon face fabric Helmet-compatible, 1-way adjustable storm hood with easy-repair exterior drawstring Water-repellent 2-way front zipper 2 climbing harness- and backpack-compatible front pockets with cross-over access and water-repellent zippers 2 front pockets with water-repellent zipper Zippered inner pocket Internal powermesh pocket X-vented underarm ventilation with water-repellent zippers Pre-shaped sleeves with hook and loop fastener Adjustable hem width with accessible drawstring for easy repair bluesign® PRODUCT PFC-free DWR Recycled Material and Technology GORE-TEX® PRO with ePE membrane Denier (main material): 80Dx80D Main Fabric 1 (B2B): 3L GORE-TEX® PRO Backing (B2B) : 100% Polyamide Backing (B2B) : 100.0% Polyamide Membrane (B2B) : 100% Polyethylene Main Fabric 1 - Face Material (B2B) : 100% Polyamide (recycled)
Mens Crater Pro HS Hooded Jacket
Weight: 508 gFeatures Regular Fit Lightweight, durable 3-layer GORE-TEX Pro fabric with a PFC-free ePE membrane for waterproof, windproof, breathable and abrasion-resistant performance 100% recycled nylon face fabric Helmet-compatible, 1-way adjustable storm hood with easy-repair exterior drawstring Water-repellent 2-way front zipper 2 climbing harness- and backpack-compatible front pockets with cross-over access and water-repellent zippers 2 front pockets with water-repellent zipper Zippered inner pocket Internal powermesh pocket X-vented underarm ventilation with water-repellent zippers Pre-shaped sleeves with hook and loop fastener Adjustable hem width with accessible drawstring for easy repair Water column: 28000 mm Breathability: RET<13 m² Pa/W Material and Construction GORE-TEX® PRO with ePE membrane Denier (main material): 80Dx80D Main Fabric 1 (B2B): 3L GORE-TEX® PRO Backing (B2B): 100% polyamide Backing (B2B): 100.0% Polyamide Lining 1 - Face Material (B2B) - 83% polyamide, 17% elastane Membrane (B2B) - 10% polyurethane, 90% polyethylene Main Fabric 1 - Face Material (B2B) - 100% polyamide (recycled)
Weight: 340g Features Waterproof - 2.5 layers of Hydroshell® laminated goodness. Breathable fabric let’s any sweat vapour out. With more than 75% recycled content and more than 90% bluesign® APPROVED fabric, this product meets our MADE KINDER criteria which helps ensure that our gear is more responsibly made. Two zip hand pockets so stuff doesn’t fall out. Storm flaps over the zips to stop rain getting in. Elasticated cuffs and adjustable hem for a close fit. Materials FABRIC: 100% POLYESTER WITH POLYURETHANE MEMBRANE
Features Berghaus Hydroshell® fabric is waterproof and breathable, keeping the wet from comng in and the sweat vapour out. Two zipped hand pockets are ideal for keeping snacks and other essentials safe and within easy reach. Fixed hood with single point adjustment so you can adapt to suit. Half elasticated cuffs and drawcord adjustment at the hem so you can adjust for comfort on the move. Material and Construction Fabric: 100% Polyester With Polyurethane Membrane Hydroshell® - Waterproof. Breathable. Lightweight. And really, really comfortable. Centre Back Length - 79cm Hydrostatic Head - 11,880mm Breathability Rating - 20,641 g/m2/24hrs
Features Internal hem cinch-cord Compatible with other garments Attached, adjustable three-piece hood Centre front zip Pit-zip venting Zipped hand pockets Adjustable hook-and-loop cuff tabs Heat transfer logos Chin guard Internal draft flap Other Features Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Recycled material: This product is made with recycled materials. Compatible with other garments: This product can be teamed with complementary products for complete weather protection. Materials and Construction Fabric - Body | 122 G/M², DryVent™ 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Lining | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Compatibility | This jacket is compatible with the men's Glacier Fleece Jacket and Gilet), the men's Classic Down and Aconcagua Jackets, and the men's Glacier Heavyweight Fleece
Features Internal hem cinch-cord Compatible with other garments Attached, adjustable three-piece hood Centre front zip Pit-zip venting Zipped hand pockets Adjustable hook-and-loop cuff tabs Heat transfer logos Chin guard Internal draft flap Other Features Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Recycled material: This product is made with recycled materials. Compatible with other garments: This product can be teamed with complementary products for complete weather protection. Materials and Construction Fabric - Body | 122 G/M², DryVent™ 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Lining | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Compatibility | This jacket is compatible with the men's Glacier Fleece Jacket and Gilet), the men's Classic Down and Aconcagua Jackets, and the men's Glacier Heavyweight Fleece
Mens Evolve II Triclimate Jacket
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. This three-in-one jacket offers waterproof, breathable protection with a DryVent™ 2L shell and a removable fleece liner Outer jacket: Waterproof, breathable, seam-sealed Brushed knit chin guard and collar lining Centre front closure with a zip and hook and loop Adjustable hood with a bonded brim stows in the collar Two secure-zip hand pockets Shock cord regulation adjustment at the hem Self-fabric cuffs with a hook and loop adjustment Embroidered logo Durable water-repellent (DWR) finish Inner jacket: Centre front zip Two secure-zip hand pockets Elastic binding at the cuffs and hem Embroidered logo Materials & Construction Fabric - Outer Jacket | 111 G/M², 2L DryVent™–100% Polyester Fabric - Inner Jacket | 190 G/M², 100% Recycled Polyester Fleece
Mens Evolve II Triclimate Jacket
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. This three-in-one jacket offers waterproof, breathable protection with a DryVent™ 2L shell and a removable fleece liner Outer jacket: Waterproof, breathable, seam-sealed Brushed knit chin guard and collar lining Centre front closure with a zip and hook and loop Adjustable hood with a bonded brim stows in the collar Two secure-zip hand pockets Shock cord regulation adjustment at the hem Self-fabric cuffs with a hook and loop adjustment Embroidered logo Durable water-repellent (DWR) finish Inner jacket: Centre front zip Two secure-zip hand pockets Elastic binding at the cuffs and hem Embroidered logo Materials & Construction Fabric - Outer Jacket | 111 G/M², 2L DryVent™–100% Polyester Fabric - Inner Jacket | 190 G/M², 100% Recycled Polyester Fleece
Features This jacket meets the water-resistance requirements of most races' mandatory kits Reverse coil zips at the front Bonded chest stow pocket Reflective details Intended Use: Running & training Other Features Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Reflective: Light reflection detailing helps you stay visible in low-light conditions. Packable: This piece can be packed into its own pocket to save space. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Fabric and Construction Fabric: 100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish / DryVent™ / Woven DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.
Features Waterproof breathable ISOTEX 30000 recycled 100% polyester stretch ripstop fabric Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Grown on technical wire peaked hood with adjusters Centre front zip with drainage channel Inner zipped security pocket 2 lower pockets & 2 chest pockets Adjustable cuffs Adjustable shockcord hem 3 Layer Fabric Made with recycled content Technology Isotex Stretch: Waterproof, breathable and windproof stretch fabric ISOTEX Stretch 30,000: Waterproof, breathable, windproof, with active stretch, 30,000mm hydrostatic head, and durable water-repellent finish. Fabric 70% Polyester; 30% Recycled Polyester
Features Waterproof breathable ISOTEX 30000 recycled 100% polyester stretch ripstop fabric Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Grown on technical wire peaked hood with adjusters Centre front zip with drainage channel Inner zipped security pocket 2 lower pockets & 2 chest pockets Adjustable cuffs Adjustable shockcord hem 3 Layer Fabric Made with recycled content Technology Isotex Stretch: Waterproof, breathable and windproof stretch fabric ISOTEX Stretch 30,000: Waterproof, breathable, windproof, with active stretch, 30,000mm hydrostatic head, and durable water-repellent finish. Fabric 70% Polyester; 30% Recycled Polyester
Weight: 550gFeatures Made out of 3-layer PROOF™ shell fabric for durable and breathable weather resistance Two zippered hand pockets Underarm ventilation Adjustable Hood Adjustable cuffs and bottom hem Recommended for: Trekking & Hiking Materials PROOF 3L, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 159 g/m², bluesign® approved
Weight: 528gFeatures 3-layer PROOF™ Pro shell for durable and breathable weather resistance Two-way center front zipper Helmet-compatible hood: Two zippered hand pockets, backpack-compatible One zippered chest pocket One-way zippered ventilation Adjustable cuffs Asymmetrical bottom hem with adjustability Recommended for: Trekking & Hiking, Lifestyle Material and Construction Proof PRO 3L woven fabric, 75 Denier, 100% Recycled Polyester Hydrostatic head: 20.000 mm Moisture Permeability: 20.000 g/m2/24h PFAS-free DWR, 157g/m2, bluesign® approved. Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved
Weight: 650gFeatures 2L GORE-TEX ePE fabric is waterproof and breathable and is PFAS-free for a reduced carbon footprint. A double storm flap on the full centre front zip delivers ultimate water protection. Roll away hood has plenty of adjustment so you can adapt to conditions and stows away neatly when not in use. Double hem adjustment allows you to find the perfect fit and keep out the elements. InterActive front zip combines with one of Berghaus' compatible midlayers for extra warmth. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. Two zipped hand pockets for keeping essentials secure and within easy reach. With more than 90% bluesign® approved fabric, this product meets Berghaus' MADE KINDER criteria which helps ensure that gear is more responsibly made. Specifications Hydrostatic Head - 28,000mm Centre Back Length - 79cm Breathability Rating - 13 (RET) Main 1 Denier - 70D Fabric BODY: 100% POLYAMIDE WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE LAMINATE LINING: 100% POLYESTER / MESH LINING: 100% POLYESTER
Weight: 630gFeatures 2L GORE-TEX ePE fabric is waterproof and breathable and is PFAS-free for a reduced carbon footprint. A double storm flap on the full centre front zip delivers ultimate water protection. Roll away hood has plenty of adjustment so you can adapt to conditions and stows away neatly when not in use. Double hem adjustment allows you to find the perfect fit and keep out the elements. InterActive front zip combines with one of Berghaus' compatible midlayers for extra warmth. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. Two zipped hand pockets for keeping essentials secure and within easy reach. Intended Use: Everyday, Commuting, Travel Materials and Technology Body: 100% Polyamide with ePE membrane Trim: 100% Polyamide with Polyurethane laminate Lining: 100% Polyester / Mesh Lining: 100% Polyester GORE-TEX - Wet outside? Stay dry. It’s that simple. Hydrostatic Head - 28,000mm Breathability Rating - 13 (RET)
Weight: 650gFeatures Please note that the although listed as Dark Blue, the product is true to the images. 2L GORE-TEX ePE fabric is waterproof and breathable and is PFAS-free for a reduced carbon footprint. A double storm flap on the full centre front zip delivers ultimate water protection. Roll away hood has plenty of adjustment so you can adapt to conditions and stows away neatly when not in use. Double hem adjustment allows you to find the perfect fit and keep out the elements. InterActive front zip combines with one of Berghaus' compatible midlayers for extra warmth. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. Two zipped hand pockets for keeping essentials secure and within easy reach. With more than 90% bluesign® approved fabric, this product meets Berghaus' MADE KINDER criteria which helps ensure that gear is more responsibly made. Specifications Hydrostatic Head - 28,000mm Centre Back Length - 79cm Breathability Rating - 13 (RET) Main 1 Denier - 70D Fabric BODY: 100% POLYAMIDE WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE LAMINATE LINING: 100% POLYESTER / MESH LINING: 100% POLYESTER
Features Omni-Tech™ fully seam sealed prevents moisture from seeping into every seam while using waterproof-breathable fabric, so you stay completely dry in the rain Crafted with 100% recycled polyester Mesh lined for breathability Drawcord-adjustable hood seals out the elements Chin guard prevents chafing Zippered hand pockets secure valuables Adjustable cuffs for a versatile fit Drawcord-adjustable hem seals out the elements Center Back Length: 29.0 in / 73.7 cm Uses: Hiking, Walking Active Fit: Body skimming fit with end-use mobility in mind Materials Shell: Omni-Tech™ Plain Weave 2L 100% Polyester Lining: 100% Polyester PFAS-FREE DESIGN: This product was designed without any PFAS (Per- and Polyfluorinated Substances), also known as 'forever chemicals'. Instead, we use a DWR finish that allows your gear to repel water without harming the environment.
Features 3-layer GORE-TEX Active 30D fabric for superior breathability and waterproofing Fully adjustable Mountain Hood that rolls away when not needed Alpine fit with pre-shaped, articulated sleeves for easy movement YKK® WR centre front zip for reliable water resistance Two large ventilated pockets with weather-resistant zips YKK® WR underarm pit zips for fast, on-the-go ventilation Adjustable laminated cuffs and dual tether hem drawcords for a tailored fit Lightweight and packable — ideal for fast-paced mountain adventures
Features 3-layer GORE-TEX Active 30D fabric for superior breathability and waterproofing Fully adjustable Mountain Hood that rolls away when not needed Alpine fit with pre-shaped, articulated sleeves for easy movement YKK® WR centre front zip for reliable water resistance Two large ventilated pockets with weather-resistant zips YKK® WR underarm pit zips for fast, on-the-go ventilation Adjustable laminated cuffs and dual tether hem drawcords for a tailored fit Lightweight and packable — ideal for fast-paced mountain adventures
Features 3-layer GORE-TEX Active 30D fabric for superior breathability and waterproofing Fully adjustable Mountain Hood that rolls away when not needed Alpine fit with pre-shaped, articulated sleeves for easy movement YKK® WR centre front zip for reliable water resistance Two large ventilated pockets with weather-resistant zips YKK® WR underarm pit zips for fast, on-the-go ventilation Adjustable laminated cuffs and dual tether hem drawcords for a tailored fit Lightweight and packable — ideal for fast-paced mountain adventures
Weight: 580gFeatures The 100% polyester 2L GORE-TEX fabric has a robust 70D face and taped seams for guaranteed waterproof protection Adjust and customise the fit with two point bungee cord and lock hem adjustment Articulated sleeve seams create a better fit and enhance freedom of movement Two zipped hand warmer pockets for keeping essentials within easy reach Zipped chest pocket to secure valuables Peaked front hood with single cord adjustment for added adaptable protection Regular fit for comfort and versatility as part of a layering system Material and Construction Body: 100% Polyester with ePE membrane Lining: 100% Polyester Trim: 100% Polyamide shell with Polyurethane coating Centre Back Length - 78cm• Hydrostatic Head - 28,000mm• Breathability Rating - 13 RET• Main 1 Denier - 75D
Weight: 580gFeatures The 100% polyester 2L GORE-TEX fabric has a robust 70D face and taped seams for guaranteed waterproof protection Adjust and customise the fit with two point bungee cord and lock hem adjustment Articulated sleeve seams create a better fit and enhance freedom of movement Two zipped hand warmer pockets for keeping essentials within easy reach Zipped chest pocket to secure valuables Peaked front hood with single cord adjustment for added adaptable protection Regular fit for comfort and versatility as part of a layering system Material and Construction Body: 100% Polyester with ePE membrane Lining: 100% Polyester Trim: 100% Polyamide shell with Polyurethane coating Centre Back Length - 78cm• Hydrostatic Head - 28,000mm• Breathability Rating - 13 RET• Main 1 Denier - 75D
Weight: 500g Features: Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry A lighter weight main body fabric keeps the jacket supple and comfortable to wear, and a heavier weight material is used on the yoke and shoulders for greater durability. Main Fabric: 40D GORE-TEX Pro (117gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <7 Reinforcements: 80D GORE-TEX Pro (154gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <7 Taped seams throughout to prevent water entry Solution dyed backer Patterning & Design Using our classic ‘Alpine Fit’ for complete freedom of movement without excess fabric The Lhotse is sized on the assumption that at some point you may need to wear a baselayer, lightweight fleece other mid-layers underneath it, so worn over just a tee-shirt in summer it may feel a little generous. That said, most people find this ‘true to size’ no matter when or with what they use it, but if you are of slight build and intend to wear only thin layers underneath it then you may need to consider dropping down a size Storm Construction - our highest specification construction for weather resistance and durability Hood Configuration Our Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Centre Front Zip Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Cuffs & Sleeves Configuration Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Bonded hem for durability Internal dual tether hem drawcords Further Features Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by our Manufacturers Lifetime Guarantee
Weight: 510gFeatures ‘Alpine Fit’ for complete freedom of movement without excess fabric Storm Construction - Mountain Equipment's highest specification construction for weather resistance and durability Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Bonded hem for durability Internal dual tether hem drawcords Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Materials Content: 100% Recycled Polyamide shell, 100% Polyamide backer, ePE Membrane Waterproof, windproof and breathable; GORE-TEX Pro fabric is guaranteed to keep you dry Taped seams throughout to prevent water entry Solution dyed backer
Weight: 510gFeatures ‘Alpine Fit’ for complete freedom of movement without excess fabric Storm Construction - Mountain Equipment's highest specification construction for weather resistance and durability Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Bonded hem for durability Internal dual tether hem drawcords Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Materials Content: 100% Recycled Polyamide shell, 100% Polyamide backer, ePE Membrane Waterproof, windproof and breathable; GORE-TEX Pro fabric is guaranteed to keep you dry Taped seams throughout to prevent water entry Solution dyed backer
Weight: 510gFeatures ‘Alpine Fit’ for complete freedom of movement without excess fabric Storm Construction - Mountain Equipment's highest specification construction for weather resistance and durability Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Bonded hem for durability Internal dual tether hem drawcords Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Materials Content: 100% Recycled Polyamide shell, 100% Polyamide backer, ePE Membrane Waterproof, windproof and breathable; GORE-TEX Pro fabric is guaranteed to keep you dry Taped seams throughout to prevent water entry Solution dyed backer
Weight: 510gFeatures: DRYVENT™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Discover more about DRYVENT™ Adjustable hood Adjustable hem with hidden stoppers Exposed pit zips for ventiliation VELCRO® tab at the cuffs Elbow-shaped seams Secure-zip hand pockets DryVent™ technology Heat transfer logo on the left chest and back-right shoulder Material and Construction: Fabric - Outer Shell : 133 G/M², 100% Polyester / Woven / Plain / DryVent™ Fabric - Lining : 66 G/M², 100% Polyester / Woven / Taffeta
Features Wind Resistant: The fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Lightweight fabrics that help regulate body temperature and keep you comfortable by allowing moisture to escape. Waterproof: Waterproof fabric provides a moisture barrier for guaranteed dryness. Stretch: Stretch fabric provides greater range of motion and ultimate comfort. Stretch AquaDry waterproof & breathable fabric with fully taped seams. Waterproof rating (hydrostatic head): 2 mm Breathability rating: 3 g/m2/24hrs H2OShield plant-based water repellent finish (fluorocarbon free) Zipped security & O/S map pocket to inner Adjustable hem Reflective logos for better visibility Articulated sleeves Technology AQUADRY: Guaranteed waterproof and breathable fabric. Designed for moderate to heavy downpours. 32" length Zipped YKK centre front with stud fastening outer stormflap & inner zip guard Dropped back hem with drawcord adjuster Grown on hood with drawcord adjusters to front & back and peak insert Cuff adjusters Recycled polyester stretch with AquaDry Membrane & H2OShield DWR, polyester stretch mesh & recycled polyester taffeta lining. Recycled zip tape to all but outer pockets. Fabric Main fabric: 100% recycled polyester / Membrane: TPU / Mesh: 100% polyester / Taffeta: 100% recycled polyester
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Patterning & Design Alpine Fit with articulated and pre-shaped sleeves allows maximum mobility YKK® WR underarm pit zips allow for airflow & ventilation when required Hood Configuration Our Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Tethered external cordlocks to adjust the hood opening Internal rear hood adjuster cord channels with rollaway clip Tricot-lined chin guard Pocket Configuration 2 outer hand pockets with YKK® WR zips and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket YKK® WR zip and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Waterproof pocket bags Stratum pocket construction increases pockets' internal volume Centre Front Zip Full length 2-way YKK® AquaGuard® centre front zip with internal stormflap Press stud fastener at the hem to eliminate zip riding up Cuffs & Sleeves Configuration Adjustable stitched cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Stitched hem Dual tether hem drawcords Further Features Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Designed and developed in the UK. Manufactured in China Main fabric made by W. L. Gore & Associates in China Materials Waterproof, windproof and breathable; GORE-TEX fabric is guaranteed to keep you dry Main Fabric: 75D GORE-TEX ePE (139gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <20 Taped seams throughout to prevent water entry
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W
Mens Millerton Insulated Jacket
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm
Mens Millerton Insulated Jacket
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm
Mens Millerton Insulated Jacket
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm
Features Loose Fit Jackets: Built for those who want extra room to move, this true loose-fit outer garment features intentional ease through the chest, shoulders, and body, allowing for comfortable layering over hoodies, sweats, and bodywarmers Wind Fighter™ - Wind resistant Storm Defender™ - Waterproof breathable laminated membrane Attached three-piece hood with adjustable hem and hidden draw cord Long Sleeve Chest pocket with zipper closure Two lower front pockets with zipper closure Packable into the wearer's left zippered lower pocket Anorak packable in zipper secure pocket Interior pocket with hook-and-loop closure Water-repellent centre front half zipper with inside storm flap and chin protector Partial elastic cuff with hook and loop closure for additional adjustment Drop-tail hem for added coverage with adjustable draw cord Fully taped waterproof seams Carhartt label sewn on pocket 4.2 oz/yd² - 142 gsm WPB 2.5-Layer Taslan Rockford Material 100% Nylon
Mens Mountain Light Triclimate GTX Jacket
Features Durable, waterproof GORE-TEX® fabric Non-PFC DWR finish for added water repellency Outer jacket: Attached three-piece hood with a drawcord and cord locks on the front and cinch-cord on the back for adjustability Outer jacket: Exposed centre front zip with an internal draft flap and chin guard Outer jacket: Reverse-coil-zip hand pockets Outer jacket: Taped external seams Outer jacket: Pit-zip venting Outer jacket: Darting at the centre back Outer jacket: Adjustable hook-and-loop cuff tabs Outer jacket: Hem cinch-cord for adjustability Outer jacket: Heat transfer logo on the left chest and back-right shoulder Outer jacket: GORE-TEX® logo on the left sleeve Inner jacket: 550-fill down Inner jacket: Reverse-coil, full-length centre front zip Inner jacket: Internal, secure-zip chest pocket Inner jacket: Reverse-coil-zip hand pockets Inner jacket: Encased-elastic cuffs with Triclimate® loops for snap-in compatibility Inner jacket: Heat transfer logo on the left chest Gore-tex®: GORE-TEX® fabric is designed to be waterproof, breathable and windproof to keep you dry and comfortable in challenging conditions. Fabric and Construction Fabric - Body: 90 G/M², GORE-TEX® 2L—100% Recycled Polyester Woven with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Inner: 95 G/M², GORE-TEX® 2L—100% Recycled Polyester Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Insulation: 550-Fill Goose Down; Responsible Down Standard (RDS) Certified by Control Union, CU 843098 Centreback: 73,025 cm
Mens Nanda Devi Insulated Jacket
Features 2-layer GORE-TEX 75D fabric. Waterproof, windproof and breathable protection Durable water-repellent (DWR) finish. Enhances waterproof performance and maintains breathability in demanding conditions 80g m⁻² POLARLOFT® synthetic insulation. Reliable warmth in cold, damp conditions Mountain fit. Relaxed fit through body and sleeves Insulated Mountain Hood. Fully adjustable, maximum protection 2 large pockets with YKK® zips and external storm flaps. Weather-protected storage 2-way YKK® Vislon® centre front zip with external stormflap. Vent and layer with ease 2-way YKK® pit zips with external flap. Ventilation without removing layers Adjustable laminated cuffs. Durable, glove-compatible seal Dual-tether hem drawcords. Snag-free, secure adjustment Inner pocket with YKK® zip. Low-profile, secure storage for valuables Material and Construction 100% Recycled Polyester shell, ePE membrane, 100% Polyester fill, 100% Polyamide lining Main: 75D - 104g / 3.1oz; Lining: 20D - 38g / 1.1oz
Mens Nanda Devi Insulated Jacket
Features 2-layer GORE-TEX 75D fabric. Waterproof, windproof and breathable protection Durable water-repellent (DWR) finish. Enhances waterproof performance and maintains breathability in demanding conditions 80g m⁻² POLARLOFT® synthetic insulation. Reliable warmth in cold, damp conditions Mountain fit. Relaxed fit through body and sleeves Insulated Mountain Hood. Fully adjustable, maximum protection 2 large pockets with YKK® zips and external storm flaps. Weather-protected storage 2-way YKK® Vislon® centre front zip with external stormflap. Vent and layer with ease 2-way YKK® pit zips with external flap. Ventilation without removing layers Adjustable laminated cuffs. Durable, glove-compatible seal Dual-tether hem drawcords. Snag-free, secure adjustment Inner pocket with YKK® zip. Low-profile, secure storage for valuables Material and Construction 100% Recycled Polyester shell, ePE membrane, 100% Polyester fill, 100% Polyamide lining Main: 75D - 104g / 3.1oz; Lining: 20D - 38g / 1.1oz
Mens North Table Down Triclimate Jacket
Features Outer jacket: Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Outer jacket: Windproof fabric Outer jacket: Pit-zip venting Outer jacket: Secure-zip hand pockets and chest pocket Outer jacket: Exposed, water-repellent VISLON® centre front zip Outer jacket: Heat transfer logo on left chest and back-right shoulder Outer jacket: Attached, fully adjustable hood Inner jacket: 600-fill recycled waterfowl down in the body Inner jacket: Heatseeker™ Eco synthetic insulation in the collar, underarms and side panels is made with hollow-core fibres for warmth, performance and durability Inner jacket: Exposed, VISLON® centre front zip Inner jacket: Secure-zip hand pockets Inner jacket: Elastic cuffs Heat transfer logo on the left chest Outer and inner have Triclimate® loops and snaps for snap-in compatibility Fabric and Construction Dryvent™ - Heatseeker™ eco - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. - Heatseeker™ Eco synthetic insulation provides durable, lightweight and compressible warmth. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions Down fill - Waterproof - Lofty down insulation maintains warmth in cold conditions Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Recycled material - Helps reduce landfill waste and the use of virgin materials.
Features Waterproof breathable ISOTEX 30000 61% polyester/39% recycled polyester stretch Ripstop fabric - 110 gsm Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Part mesh, part recycled polyester taffeta lining Grown on technical hood with adjusters Inner zipped pocket Water repellent centre front zip with inner zip guard & drainage channel 2 lower pockets with water repellent zips Underarm ventilation zips with mesh lining Adjustable cuffs Adjustable shock cord hem Fabric 61% Polyester; 39% Recycled Polyester
Features Waterproof breathable ISOTEX 30000 61% polyester/39% recycled polyester stretch Ripstop fabric - 110 gsm Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Part mesh, part recycled polyester taffeta lining Grown on technical hood with adjusters Inner zipped pocket Water repellent centre front zip with inner zip guard & drainage channel 2 lower pockets with water repellent zips Underarm ventilation zips with mesh lining Adjustable cuffs Adjustable shock cord hem Fabric 61% Polyester; 39% Recycled Polyester
Features Waterproof & Breathable - Protects from wet weather conditions, allowing moisture vapour to escape through fabric Taped Seams - Enhances the waterproof protection of clothing Packs Away - Product packs away into pocket/ bag for ease of carrying Waterproof and breathable Isolite 5000 lightweight polyamide fabric Breathability rating 5,000g/m²/24 hours Unlined Packs away into stuff sack Machine Washable Isolite: Lightweight waterproof, breathable and windproof fabric Materials 100% Polyamide
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Designed to keep you warm and dry Waterproof, breathable, seam-sealed DryVent™ 2L shell Brushed knit back neck and chin guard lining Exposed centre front zip with a water-resistant finish Fixed hood with one-way hood regulation Two secure-zip hand pockets Shock cord regulation adjustment at the hem Elasticated cuffs Heat transfer logo Materials & Construction Fabric | 110 G/M², DryVent™ 2L–100% Polyester Insulation | 100% Polyester
Weight: 505g Fabric: 75D 110 g/m² 2L DryVent™ - 100% polyester Waterproof, breathable, seam sealed DryVent™ 2L Mesh body lining $$ Brushed knit back neck and chin guard lining Reverse-coil centre front zip with water resistant finish Fixed Hood, with one way hood regulation Two secure-zip covered hand pockets Shock cord regulation adjustment at hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish
Features Waterproof, breathable, seam-sealed fabric Mesh body lining Brushed knit back neck and chin guard lining Exposed centre front zip with a water-resistant finish Fixed hood with one-way hood regulation Two hand pockets with zip closure Shock cord regulation adjustment at the hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish Fabric: 2L DryVent™ Dobby–100% Polyester with Durable Water-Repellent (DWR) Finish
Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable
Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable
Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. COMPATIBLE WITH OTHER GARMENTS - This product can be teamed with complementary products for complete weather protection. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Outer: waterproof and breathable with a zip-in midlayer, reinforced hood peak, 1 external zipped chest pocket, 2 zipped hand pockets. Inner: full-zip with kangaroo pocket Materials & Construction Fabric - Outer | DryVent™ 2L–100% Polyester / Woven / Zip-in System Fabric - Inner | 95% Polyester, 5% Elastane / Knit / Grid-Backed Fleece Centreback | 67,31 cm
Weight: 350gFeatures 2.5-layer DRILITE ® 40D fabric with PFAS-free DWR Mountain Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves Full length WR centre front zip with internal flap 2 large ventilated pockets with water resistant zips Underarm pit zips with internal flap Adjustable cuffs and dual tether hem drawcords Inner pocket Material and Construction Fabric: 40D - 85g / 2.5oz Content: 100% Polyamide, PU Membrane
Weight: 598g WATERPROOF GUARANTEE Our fully breathable and Waterproof Hydroshell® fabric keeps you dry and protected when the weather turns. The centre-front zip is covered for additional Waterproof protection. ADJUST YOUR SETUP Adjustable hood offers enhanced wet weather protection and can be neatly rolled away when not in use. ESSENTIALS IN REACH Keep your vital bits and pieces close at hand using the two hand-warmer pockets.
Weight: 598gFeatures Berghaus Hydroshell® fabric is waterproof and breathable, with a storm flap for added protection. The adjustable rollaway hood provides extra weather protection in seconds when needed, and packs away neatly when not. Two lower zipped hand pockets are ideal for storing essentials. Fully adjustable back hem to keep out draughts. Hydrostatic Head - 12,250mm Breathability Rating - 5,063 (g/m2/24hrs) Fabric Fabric: 100% Polyamide / Solid Lining: 100% Polyamide / Mesh Lining: 100% Polyester
Weight: 556gFeatures Tough 3L GORE-TEX is a breathable barrier to any water. Bodymapped abrasion resistance adds durability where you need it, without extra bulk. A fixed, wired hood with two-point adjustment - it moves with you and stays put. Easy access storage for essentials in zipped internal and external chest pockets. Two zipped hand pockets that are compatible with pack or harness. Pit zips for dumping heat when working hard. Easy to use Velcro adjustment at the cuffs for extra protection. Cordlock adjustment at the hem. Two-way centre front zip for added versatility. Fabric and Construction GORE-TEX - Wet outside? Stay dry. It’s that simple. Hydrostatic Head - 28000mm Breathability Rating - 6 (RET) Body: 100% polyester with ePE membrane.
Weight: 556gFeatures Tough 3L GORE-TEX is a breathable barrier to any water. Bodymapped abrasion resistance adds durability where you need it, without extra bulk. A fixed, wired hood with two-point adjustment - it moves with you and stays put. Easy access storage for essentials in zipped internal and external chest pockets. Two zipped hand pockets that are compatible with pack or harness. Pit zips for dumping heat when working hard. Easy to use Velcro adjustment at the cuffs for extra protection. Cordlock adjustment at the hem. Two-way centre front zip for added versatility. Fabric and Construction GORE-TEX - Wet outside? Stay dry. It’s that simple. Hydrostatic Head - 28000mm Breathability Rating - 6 (RET) Body: 100% polyester with ePE membrane.
Patterning & Design Alpine Fit with articulated and pre-shaped sleeves allows maximum mobility A very adaptable jacket which is based on our Alpine Fit pattern. It is well suited both to wearing with multiple midlayers in winter as well as just thin layers in summer. Most people find the Saltoro fits ‘true to size’ no matter when or with which layers they wear it with YKK® WR side zips allow for airflow & ventilation when required Hood Configuration Our Mountain Hood provides dependable shelter during harsh weather conditions Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Tethered external cordlocks to adjust the hood opening Internal rear hood adjuster cord channels with rollaway clip Pocket Configuration 2 large outer hand pockets with YKK® WR zips with zip garages, positioned to be accessible when carrying a pack and large enough to store gloves and other items Waterproof pocket bags Centre Front Zip Full length 2-way YKK® moulded AquaGuard® centre front zip with internal storm flap Cuffs & Sleeves Configuration Adjustable laminated cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Stitched hem Dual tether hem drawcords Further Features Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Designed and developed in the UK. Manufactured in China Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry Main Fabric: Waterproof breathable 3-layer construction, 75 Denier, 100% Recycled polyester face fabric with GORE-TEX ePE membrane PFAS - Free DWR Taped seams throughout to prevent water entry
Patterning & Design Alpine Fit with articulated and pre-shaped sleeves allows maximum mobility A very adaptable jacket which is based on our Alpine Fit pattern. It is well suited both to wearing with multiple midlayers in winter as well as just thin layers in summer. Most people find the Saltoro fits ‘true to size’ no matter when or with which layers they wear it with YKK® WR side zips allow for airflow & ventilation when required Hood Configuration Our Mountain Hood provides dependable shelter during harsh weather conditions Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Tethered external cordlocks to adjust the hood opening Internal rear hood adjuster cord channels with rollaway clip Pocket Configuration 2 large outer hand pockets with YKK® WR zips with zip garages, positioned to be accessible when carrying a pack and large enough to store gloves and other items Waterproof pocket bags Centre Front Zip Full length 2-way YKK® moulded AquaGuard® centre front zip with internal storm flap Cuffs & Sleeves Configuration Adjustable laminated cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Stitched hem Dual tether hem drawcords Further Features Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Designed and developed in the UK. Manufactured in China Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry Main Fabric: Waterproof breathable 3-layer construction, 75 Denier, 100% Recycled polyester face fabric with GORE-TEX ePE membrane PFAS - Free DWR Taped seams throughout to prevent water entry
Patterning & Design Alpine Fit with articulated and pre-shaped sleeves allows maximum mobility A very adaptable jacket which is based on our Alpine Fit pattern. It is well suited both to wearing with multiple midlayers in winter as well as just thin layers in summer. Most people find the Saltoro fits ‘true to size’ no matter when or with which layers they wear it with YKK® WR side zips allow for airflow & ventilation when required Hood Configuration Our Mountain Hood provides dependable shelter during harsh weather conditions Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Tethered external cordlocks to adjust the hood opening Internal rear hood adjuster cord channels with rollaway clip Pocket Configuration 2 large outer hand pockets with YKK® WR zips with zip garages, positioned to be accessible when carrying a pack and large enough to store gloves and other items Waterproof pocket bags Centre Front Zip Full length 2-way YKK® moulded AquaGuard® centre front zip with internal storm flap Cuffs & Sleeves Configuration Adjustable laminated cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Stitched hem Dual tether hem drawcords Further Features Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Designed and developed in the UK. Manufactured in China Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry Main Fabric: Waterproof breathable 3-layer construction, 75 Denier, 100% Recycled polyester face fabric with GORE-TEX ePE membrane PFAS - Free DWR Taped seams throughout to prevent water entry
Features Made from recycled yarns Wind resistant Water resistant PFAS free fabric Lightweight Self-packable pocket with hand strap Secure pocket Key loop Roll away hood Venting tab Reflective Relaxed fit Fibre Composition 100% Recycled Polyamide
Weight: 640gFeatures 3-layer GORE-TEX 75D PFCec FREE recycled polyester plain weave fabric offers high levels of protection Grown on fully adjustable Hill Hood with a wired peak and roll away tab feature 2-way YKK® centre front zip with double storm guard 2 zipped hand pockets with map shelf 1 inner zipped stretch softshell pocket 1 inner stretch mesh elastane bound stash pocket 2-way pit zips Concealed drawcord waist adjustment Adjustable cuffs Adjustable split hem drawcords Composition 100% recycled polyester PTFE membrane
Weight: 500gFeatures Ideal for Ice & Mixed Climbing, Alpine Climbing and Mountaineering Minimalist and rugged design built for efficient movement and protection Using their classic ‘Alpine Fit’ for complete freedom of movement without excess fabric. Sized to be worn as part of a layering system. The Tupilak has a slightly narrower hem and marginally shorter length when compared with, for example, the Lhotse Jacket, making it a little closer fitting and better suited to steep climbing Storm Construction - our highest specification construction for weather resistance and durability Technical tailoring around the arms enables arm lift, preventing the lower hem from rising whilst reaching high during climbs Laminated and bonded hanging loop below the rear hood 2-way YKK® WR underarm pit zips with laminated and bonded entry Super Alpine Helmet Compatible (HC) Hood is fully adjustable with rear/lateral volume adjustment, two frontal adjusters and internal helmet-gripping silicone strips Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses/goggles Seamless face panel is cut to shield from freezing winds and spin drift whilst remaining comfortable and unrestrictive Internal rear hood adjuster cord channels with rollaway clip Internal Cohaesive® cord locks and cord tunnel Two large volume outer chest pockets with YKK® AquaGuard® zips, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves, etc YKK® #5 AquaGuard® pocket zips with internal storm flap, drainage channel and zip garages Ergonomic zip pullers make use easier when wearing gloves or mitts Fully laminated pocket construction with waterproof pocket bags Single inner zipped security pocket for storage of small items Other Features Full-length 2-way YKK® AquaGuard® #5 centre front zip with laser cut internal storm flap Press stud fastener system at the hem allows venting through an open front zip whilst ensuring the jacket is secured to the body Ergonomic zip pullers make use easier when wearing gloves or mitts Roll over chinguard lined with brushed fine microfleece for comfort next to the mouth and chin Articulated and pre-shaped sleeves for ease of high arm movement during climbing Velcro adjustable and bonded cuffs for a comfortable and reliable close fit around wrists or over gloves/mitts with ease. Internal dual tether hem drawcords to fit the body and minimise heat loss. Bar tack reinforcement on the pull tab Bonded hem Mountain Equipment reflective logo detailing on the front chest, right upper arm and centre back Main fabric made by W. L. Gore & Associates in China. Designed and developed in the UK. Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Materials Waterproof, Windproof & Breathable: GORE-TEX Pro 80D fabric is guaranteed to keep you dry Main Fabric: 3-layer GORE-TEX Pro 80D fabric with ePE membrane and a PFAS-free DWR. 13mm taped seams throughout to prevent water entry
Features Attached, adjustable hood Centre front zip Vertical zipped chest pockets Secure-zip hand pockets Zipped underarm vents Internal hem adjuster Adjustable hook-and-loop cuffs Intended Use: Hiking Other Features Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Standard fit: This garment is true to size for an easy, comfortable fit. Fabric and Construction Fabric - Body: 165 G/M², DryVent™ 3L—85% Recycled Polyester, 15% Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Hood, Collar & Draft Flap Lining: 111 G/M², DryVent™ 2L—100% Recycled Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.
Features Attached, adjustable hood Centre front zip Vertical zipped chest pockets Secure-zip hand pockets Zipped underarm vents Internal hem adjuster Adjustable hook-and-loop cuffs Intended Use: Hiking Other Features Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Standard fit: This garment is true to size for an easy, comfortable fit. Fabric and Construction Fabric - Body: 165 G/M², DryVent™ 3L—85% Recycled Polyester, 15% Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Hood, Collar & Draft Flap Lining: 111 G/M², DryVent™ 2L—100% Recycled Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.
Weight: 220gFeatures Size: 133cm x 205cm Waterproof Vinyl Electronically welded seams Can be used as an emergency groundsheet Lightweight emergency rain protection Material: 100% Polyester