Haglofs Mens Alert GTX Jacket

Weight: 507gFeatures 2-layer GORE-TEX, GUARANTEED TO KEEP YOU DRY™ Two zippered hand pockets and one zippered chest pocket Aquaguard vislon center-front zipper Adjustable hood Velcro-adjustable cuffs Adjustable bottom hem Standard fit Materials GORE-TEX plain weave 2L, With ePE laminate 100% Recycled Polyester, 75 Denier, Hydrostatic Head:28.000mm Water Permeability RET:13 PFAS-free DWR, 100g/m2, Bluesign® approved.,  Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved., Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved. Woven fabric, 100% Polyamide, PFAS-free DWR, 134 g/m², bluesign® approved.  

Regatta Mens Oklarna

Features Waterproof breathable ISOTEX 30000 61% polyester/39% recycled polyester stretch Ripstop fabric - 110 gsm Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Part mesh, part recycled polyester taffeta lining Grown on technical hood with adjusters Inner zipped pocket Water repellent centre front zip with inner zip guard & drainage channel 2 lower pockets with water repellent zips Underarm ventilation zips with mesh lining Adjustable cuffs Adjustable shock cord hem Fabric 61% Polyester; 39% Recycled Polyester

Mountain Equipment Mens Nanda Devi Insulated Jacket

Features 2-layer GORE-TEX 75D fabric. Waterproof, windproof and breathable protection Durable water-repellent (DWR) finish. Enhances waterproof performance and maintains breathability in demanding conditions 80g m⁻² POLARLOFT® synthetic insulation. Reliable warmth in cold, damp conditions Mountain fit. Relaxed fit through body and sleeves Insulated Mountain Hood. Fully adjustable, maximum protection 2 large pockets with YKK® zips and external storm flaps. Weather-protected storage 2-way YKK® Vislon® centre front zip with external stormflap. Vent and layer with ease 2-way YKK® pit zips with external flap. Ventilation without removing layers Adjustable laminated cuffs. Durable, glove-compatible seal Dual-tether hem drawcords. Snag-free, secure adjustment Inner pocket with YKK® zip. Low-profile, secure storage for valuables Material and Construction 100% Recycled Polyester shell, ePE membrane, 100% Polyester fill, 100% Polyamide lining Main: 75D - 104g / 3.1oz; Lining: 20D - 38g / 1.1oz  

Mountain Equipment Mens Kedar Jacket

Features 3-layer GORE-TEX Active 30D fabric for superior breathability and waterproofing Fully adjustable Mountain Hood that rolls away when not needed Alpine fit with pre-shaped, articulated sleeves for easy movement YKK® WR centre front zip for reliable water resistance Two large ventilated pockets with weather-resistant zips YKK® WR underarm pit zips for fast, on-the-go ventilation Adjustable laminated cuffs and dual tether hem drawcords for a tailored fit Lightweight and packable — ideal for fast-paced mountain adventures  

Berghaus Mens Kielder GTX Jacket

Weight: 580gFeatures The 100% polyester 2L GORE-TEX fabric has a robust 70D face and taped seams for guaranteed waterproof protection Adjust and customise the fit with two point bungee cord and lock hem adjustment Articulated sleeve seams create a better fit and enhance freedom of movement Two zipped hand warmer pockets for keeping essentials within easy reach Zipped chest pocket to secure valuables Peaked front hood with single cord adjustment for added adaptable protection Regular fit for comfort and versatility as part of a layering system Material and Construction Body: 100% Polyester with ePE membrane  Lining: 100% Polyester Trim: 100% Polyamide shell with Polyurethane coating Centre Back Length - 78cm• Hydrostatic Head - 28,000mm• Breathability Rating - 13 RET• Main 1 Denier - 75D  

Berghaus Mens Ridge Seeker GTX Jacket

Weight: 556gFeatures Tough 3L GORE-TEX is a breathable barrier to any water. Bodymapped abrasion resistance adds durability where you need it, without extra bulk. A fixed, wired hood with two-point adjustment - it moves with you and stays put. Easy access storage for essentials in zipped internal and external chest pockets. Two zipped hand pockets that are compatible with pack or harness. Pit zips for dumping heat when working hard. Easy to use Velcro adjustment at the cuffs for extra protection. Cordlock adjustment at the hem. Two-way centre front zip for added versatility. Fabric and Construction GORE-TEX - Wet outside? Stay dry. It’s that simple. Hydrostatic Head - 28000mm Breathability Rating - 6 (RET) Body: 100% polyester with ePE membrane.

The North Face Mens Dryvent Zip In Jacket

Features Internal hem cinch-cord  Compatible with other garments  Attached, adjustable three-piece hood  Centre front zip  Pit-zip venting  Zipped hand pockets  Adjustable hook-and-loop cuff tabs Heat transfer logos  Chin guard  Internal draft flap Other Features Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill.  Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Recycled material: This product is made with recycled materials. Compatible with other garments: This product can be teamed with complementary products for complete weather protection. Materials and Construction Fabric - Body | 122 G/M², DryVent™ 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish  Fabric - Lining | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish  Compatibility | This jacket is compatible with the men's Glacier Fleece Jacket and Gilet), the men's Classic Down and Aconcagua Jackets, and the men's Glacier Heavyweight Fleece

The North Face Mens Quest Mono Jacket

Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable

The North Face Mens Valley View Jacket

Features Attached, adjustable hood Centre front zip Vertical zipped chest pockets Secure-zip hand pockets Zipped underarm vents Internal hem adjuster Adjustable hook-and-loop cuffs Intended Use: Hiking Other Features Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Standard fit: This garment is true to size for an easy, comfortable fit. Fabric and Construction Fabric - Body: 165 G/M², DryVent™ 3L—85% Recycled Polyester, 15% Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Hood, Collar & Draft Flap Lining: 111 G/M², DryVent™ 2L—100% Recycled Nylon with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.

The North Face Mens Fontanales Jacket

Features This jacket meets the water-resistance requirements of most races' mandatory kits Reverse coil zips at the front Bonded chest stow pocket Reflective details Intended Use: Running & training Other Features Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Reflective: Light reflection detailing helps you stay visible in low-light conditions. Packable: This piece can be packed into its own pocket to save space. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Fabric and Construction Fabric: 100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish / DryVent™ / Woven DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.

Haglofs Mens Front Proof II Jacket

Weight: 528gFeatures 3-layer PROOF™ Pro shell for durable and breathable weather resistance Two-way center front zipper Helmet-compatible hood: Two zippered hand pockets, backpack-compatible One zippered chest pocket One-way zippered ventilation Adjustable cuffs Asymmetrical bottom hem with adjustability Recommended for: Trekking & Hiking, Lifestyle Material and Construction Proof PRO 3L woven fabric, 75 Denier, 100% Recycled Polyester  Hydrostatic head: 20.000 mm  Moisture Permeability: 20.000 g/m2/24h  PFAS-free DWR, 157g/m2, bluesign® approved. Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved

Ron Hill Mens Tech All Terrain Jacket

Features Made from recycled yarns Wind resistant Water resistant PFAS free fabric Lightweight Self-packable pocket with hand strap Secure pocket Key loop Roll away hood Venting tab Reflective Relaxed fit Fibre Composition 100% Recycled Polyamide    

Mammut Mens Crater Pro HS Hooded Jacket

Weight: 508gFeatures Lightweight, durable 3-layer GORE-TEX Pro fabric with a PFC-free ePE membrane for waterproof, windproof, breathable and abrasion-resistant performance 100% recycled nylon face fabric Helmet-compatible, 1-way adjustable storm hood with easy-repair exterior drawstring Water-repellent 2-way front zipper 2 climbing harness- and backpack-compatible front pockets with cross-over access and water-repellent zippers 2 front pockets with water-repellent zipper Zippered inner pocket Internal powermesh pocket X-vented underarm ventilation with water-repellent zippers Pre-shaped sleeves with hook and loop fastener Adjustable hem width with accessible drawstring for easy repair bluesign® PRODUCT PFC-free DWR Recycled Material and Technology GORE-TEX® PRO with ePE membrane Denier (main material): 80Dx80D Main Fabric 1 (B2B): 3L GORE-TEX® PRO Backing (B2B) : 100% Polyamide Backing (B2B) : 100.0% Polyamide Membrane (B2B) : 100% Polyethylene Main Fabric 1 - Face Material (B2B) : 100% Polyamide (recycled)  

Berghaus Mens Hillwalker 2.0 Jacket

Weight: 650gFeatures 2L GORE-TEX ePE fabric is waterproof and breathable and is PFAS-free for a reduced carbon footprint. A double storm flap on the full centre front zip delivers ultimate water protection. Roll away hood has plenty of adjustment so you can adapt to conditions and stows away neatly when not in use. Double hem adjustment allows you to find the perfect fit and keep out the elements. InterActive front zip combines with one of Berghaus' compatible midlayers for extra warmth. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. Two zipped hand pockets for keeping essentials secure and within easy reach. With more than 90% bluesign® approved fabric, this product meets Berghaus' MADE KINDER criteria which helps ensure that gear is more responsibly made. Specifications Hydrostatic Head - 28,000mm Centre Back Length - 79cm Breathability Rating - 13 (RET) Main 1 Denier - 70D Fabric BODY: 100% POLYAMIDE WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE LAMINATE LINING: 100% POLYESTER / MESH LINING: 100% POLYESTER  

Berghaus Mens Cornice 2.0 Jacket

Weight: 690gFeatures 2L GORE-TEX ePE fabric is waterproof and breathable, and is PFAS-free for a reduced carbon footprint. A double storm flap on the centre front zip provides additional protection from wet weather. Two lower zipped pockets and a zipped internal map pocket provide plenty of storage for walking essentials. Fully adjustable hood, for versatility and to maximise protection when needed most. Rollaway hood has a brushed fleece lining at the collar for added comfort. Drawcords at waist and hem allow for a bespoke and comfortable fit, as part of a layering system. Hook and loop adjustment at the cuffs keeps in the heat and allows for a snug fit. InterActive front zip is compatible with all Berghaus InterActive midlayer jackets. With more than 75% recycled content and more than 90% bluesign® APPROVED fabric, this product meets our MADE KINDER criteria which helps ensure that our gear is more responsibly made. Centre Back Length - 85cm Hydrostatic Head - 28,000mm Breathability Rating - 20 (RET) Main 1 Denier - 75D Fabric and Construction BODY: 100% POLYESTER WITH ePE MEMBRANE TRIM: 100% POLYAMIDE WITH POLYURETHANE LAMINATE LINING: 100% POLYESTER / MESH LINING: 100% POLYESTER  

The North Face Mens North Table Down Triclimate Jacket

Features Outer jacket: Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Outer jacket: Windproof fabric Outer jacket: Pit-zip venting Outer jacket: Secure-zip hand pockets and chest pocket Outer jacket: Exposed, water-repellent VISLON® centre front zip Outer jacket: Heat transfer logo on left chest and back-right shoulder Outer jacket: Attached, fully adjustable hood Inner jacket: 600-fill recycled waterfowl down in the body Inner jacket: Heatseeker™ Eco synthetic insulation in the collar, underarms and side panels is made with hollow-core fibres for warmth, performance and durability Inner jacket: Exposed, VISLON® centre front zip Inner jacket: Secure-zip hand pockets Inner jacket: Elastic cuffs Heat transfer logo on the left chest Outer and inner have Triclimate® loops and snaps for snap-in compatibility Fabric and Construction Dryvent™ - Heatseeker™ eco - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. - Heatseeker™ Eco synthetic insulation provides durable, lightweight and compressible warmth. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions Down fill - Waterproof - Lofty down insulation maintains warmth in cold conditions Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Recycled material - Helps reduce landfill waste and the use of virgin materials.  

The North Face Mens Mountain Light Triclimate GTX Jacket

Features Durable, waterproof GORE-TEX® fabric Non-PFC DWR finish for added water repellency Outer jacket: Attached three-piece hood with a drawcord and cord locks on the front and cinch-cord on the back for adjustability Outer jacket: Exposed centre front zip with an internal draft flap and chin guard Outer jacket: Reverse-coil-zip hand pockets Outer jacket: Taped external seams Outer jacket: Pit-zip venting Outer jacket: Darting at the centre back Outer jacket: Adjustable hook-and-loop cuff tabs Outer jacket: Hem cinch-cord for adjustability Outer jacket: Heat transfer logo on the left chest and back-right shoulder Outer jacket: GORE-TEX® logo on the left sleeve Inner jacket: 550-fill down Inner jacket: Reverse-coil, full-length centre front zip Inner jacket: Internal, secure-zip chest pocket Inner jacket: Reverse-coil-zip hand pockets Inner jacket: Encased-elastic cuffs with Triclimate® loops for snap-in compatibility Inner jacket: Heat transfer logo on the left chest Gore-tex®: GORE-TEX® fabric is designed to be waterproof, breathable and windproof to keep you dry and comfortable in challenging conditions. Fabric and Construction Fabric - Body: 90 G/M², GORE-TEX® 2L—100% Recycled Polyester Woven with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Inner: 95 G/M², GORE-TEX® 2L—100% Recycled Polyester Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Insulation: 550-Fill Goose Down; Responsible Down Standard (RDS) Certified by Control Union, CU 843098 Centreback: 73,025 cm  

The North Face Mens Carto Mono Triclimate Hooded Jacket

Features and Benefits Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Circular design - This item is part of our Circular Design initiative – a collection designed to help regenerate natural systems by minimising waste and pollution. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. Circular Design: thoughtfully designed to be disassembled and recycled by us at the end of its life into raw materials for a second generation of products Outer and inner have Triclimate® loops and snaps for snap-in compatibility Outer jacket: DryVent™ Mono delivers seam-sealed, waterproof protection in a mono-material construction that’s designed to be recycled by us and put back into the supply chain Outer jacket: Non-PFC DWR finish for added water repellency Outer jacket: Attached, adjustable hood with a cinch cord with cord locks in the front and back Outer jacket: Adjustable hook-and-loop cuff tabs Outer jacket: Embroidered logo on the left chest and back-right shoulder Inner jacket: Wind-resistant WINDWALL™ fabric Inner jacket: Non-PFC DWR finish for added water repellency Inner jacket: Heatseeker™ synthetic insulation is made with hollow-core fibres for added warmth, performance and durability Inner jacket: Secure-zip hand pockets Inner jacket: Embroidered logo on the left chest Fabric and Materials Fabric - Outer Body | 123 G/M², DryVent™ Mono 2L—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish $$ Fabric - Outer & Inner Lining | 66 G/M², 100% Recycled Polyester Fabric - Outer Pocket Lining | 90 G/M², 100% Recycled Polyester $$ Fabric - Inner Body | 78 G/M², WindWall™—100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish $$ Inner Insulation | 100 g Heatseeker™—70% Post-Consumer Recycled Polyester $$ Centreback | 76,2 cm Technology Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Heatseeker™ - Synthetic Heatseeker™ insulation delivers exceptional warmth without the bulk. It is highly durable and compressible – ideal for packing into backpacks and luggage. Windwall™ - WindWall™ fabrics are engineered to reduce the effects of chilling winds while maintaining a good level of breathability.  

The North Face Mens Lightning Zip In Jacket

Weight: 510gFeatures: DRYVENT™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Discover more about DRYVENT™ Adjustable hood Adjustable hem with hidden stoppers Exposed pit zips for ventiliation VELCRO® tab at the cuffs Elbow-shaped seams Secure-zip hand pockets DryVent™ technology Heat transfer logo on the left chest and back-right shoulder Material and Construction: Fabric - Outer Shell : 133 G/M², 100% Polyester / Woven / Plain / DryVent™ Fabric - Lining : 66 G/M², 100% Polyester / Woven / Taffeta    

Mountain Equipment Mens Saltoro Jacket

Patterning & Design Alpine Fit with articulated and pre-shaped sleeves allows maximum mobility A very adaptable jacket which is based on our Alpine Fit pattern. It is well suited both to wearing with multiple midlayers in winter as well as just thin layers in summer. Most people find the Saltoro fits ‘true to size’ no matter when or with which layers they wear it with YKK® WR side zips allow for airflow & ventilation when required Hood Configuration Our Mountain Hood provides dependable shelter during harsh weather conditions Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Tethered external cordlocks to adjust the hood opening Internal rear hood adjuster cord channels with rollaway clip Pocket Configuration 2 large outer hand pockets with YKK® WR zips with zip garages, positioned to be accessible when carrying a pack and large enough to store gloves and other items Waterproof pocket bags Centre Front Zip Full length 2-way YKK® moulded AquaGuard® centre front zip with internal storm flap Cuffs & Sleeves Configuration Adjustable laminated cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Stitched hem Dual tether hem drawcords Further Features Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Designed and developed in the UK. Manufactured in China Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry Main Fabric: Waterproof breathable 3-layer construction, 75 Denier, 100% Recycled polyester face fabric with GORE-TEX ePE membrane PFAS - Free DWR Taped seams throughout to prevent water entry

Berghaus Mens Deluge Pro 3.0 Jacket

Weight: 340g Features Waterproof - 2.5 layers of Hydroshell® laminated goodness. Breathable fabric let’s any sweat vapour out. With more than 75% recycled content and more than 90% bluesign® APPROVED fabric, this product meets our MADE KINDER criteria which helps ensure that our gear is more responsibly made. Two zip hand pockets so stuff doesn’t fall out.  Storm flaps over the zips to stop rain getting in. Elasticated cuffs and adjustable hem for a close fit. Materials FABRIC: 100% POLYESTER WITH POLYURETHANE MEMBRANE

The North Face Mens Quest Triclimate Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. COMPATIBLE WITH OTHER GARMENTS - This product can be teamed with complementary products for complete weather protection. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Outer: waterproof and breathable with a zip-in midlayer, reinforced hood peak, 1 external zipped chest pocket, 2 zipped hand pockets. Inner: full-zip with kangaroo pocket Materials & Construction Fabric - Outer | DryVent™ 2L–100% Polyester / Woven / Zip-in System Fabric - Inner | 95% Polyester, 5% Elastane / Knit / Grid-Backed Fleece Centreback | 67,31 cm

The North Face Mens Millerton Insulated Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm 

The North Face Mens Antora Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry Windproof fabric Alpine-style design with secure-zip hand pockets Attached, adjustable, three-piece hood with a drawcord and cord locks Storm flap with a hook-and-loop closure covers the centre front zip Encased-elastic cuffs Internal cinch-cord with a cord lock at the hem for adjustability Heat transfer logo on the left chest and back-right shoulder Materials & Construction Fabric - Body | 111 G/M², DryVent™ 2L—100% Recycled Nylon  Ripstop with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish Fabric - Body Lining | 50 G/M², 100% Recycled Polyester Mesh Fabric - Hood, Sleeve & Pocket Lining | 66 G/M², 100% Recycled Polyester Taffeta Centreback | 73,66 cm

Berghaus Mens RG Alpha 2.0 Jacket

Weight: 598g WATERPROOF GUARANTEE Our fully breathable and Waterproof Hydroshell® fabric keeps you dry and protected when the weather turns. The centre-front zip is covered for additional Waterproof protection. ADJUST YOUR SETUP Adjustable hood offers enhanced wet weather protection and can be neatly rolled away when not in use. ESSENTIALS IN REACH Keep your vital bits and pieces close at hand using the two hand-warmer pockets.

Regatta Mens Pack It Jacket III

Features Waterproof & Breathable - Protects from wet weather conditions, allowing moisture vapour to escape through fabric Taped Seams - Enhances the waterproof protection of clothing Packs Away - Product packs away into pocket/ bag for ease of carrying Waterproof and breathable Isolite 5000 lightweight polyamide fabric Breathability rating 5,000g/m²/24 hours Unlined Packs away into stuff sack Machine Washable Isolite: Lightweight waterproof, breathable and windproof fabric Materials 100% Polyamide

The North Face Mens Evolve II Triclimate Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. This three-in-one jacket offers waterproof, breathable protection with a DryVent™ 2L shell and a removable fleece liner Outer jacket: Waterproof, breathable, seam-sealed Brushed knit chin guard and collar lining Centre front closure with a zip and hook and loop Adjustable hood with a bonded brim stows in the collar Two secure-zip hand pockets Shock cord regulation adjustment at the hem Self-fabric cuffs with a hook and loop adjustment Embroidered logo  Durable water-repellent (DWR) finish  Inner jacket: Centre front zip  Two secure-zip hand pockets Elastic binding at the cuffs and hem Embroidered logo Materials & Construction Fabric - Outer Jacket | 111 G/M², 2L DryVent™–100% Polyester Fabric - Inner Jacket | 190 G/M², 100% Recycled Polyester Fleece

Berghaus Mens Cornice Jacket IA

Weight: 769g WATERPROOF GUARANTEED - GORE-TEX® Storm-level construction is guaranteed to be waterproof and is fully breathable. A double storm flap on the centre-front zip increases protection. COMBINE WITH EASE - Addition of an InterActive zip means you can combine the Cornice with one of Berghaus InterActive fleece jackets for extra warmth in the depths of winter. WET WEATHER PROTECTION - Adjustable hood offers enhanced wet weather protection and can be neatly rolled away when not in use.  Keep essentials close at hand with three useful pockets, including a zippered map pocket. Elasticated, adjustable cuffs and dual drawcord hem help you find your perfect fit.

The North Face Mens Quest Jacket

Weight: 505g Fabric: 75D 110 g/m² 2L DryVent™ - 100% polyester Waterproof, breathable, seam sealed DryVent™ 2L Mesh body lining $$ Brushed knit back neck and chin guard lining Reverse-coil centre front zip with water resistant finish Fixed Hood, with one way hood regulation Two secure-zip covered hand pockets Shock cord regulation adjustment at hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish