Carhartt Mens Monterey Jacket

Features Loose Fit Jackets: Built for those who want extra room to move, this true loose-fit outer garment features intentional ease through the chest, shoulders, and body, allowing for comfortable layering over hoodies, sweats, and bodywarmers Wind Fighter™ - Wind resistant Storm Defender™ - Waterproof breathable laminated membrane Attached three-piece hood with adjustable hem and hidden draw cord Long Sleeve Chest pocket with zipper closure Two lower front pockets with zipper closure Packable into the wearer's left zippered lower pocket Anorak packable in zipper secure pocket Interior pocket with hook-and-loop closure Water-repellent centre front half zipper with inside storm flap and chin protector Partial elastic cuff with hook and loop closure for additional adjustment Drop-tail hem for added coverage with adjustable draw cord Fully taped waterproof seams Carhartt label sewn on pocket 4.2 oz/yd² - 142 gsm WPB 2.5-Layer Taslan Rockford Material 100% Nylon  

Regatta Mens Oklarna

Features Waterproof breathable ISOTEX 30000 61% polyester/39% recycled polyester stretch Ripstop fabric - 110 gsm Breathability rating 30,000 g/m²/24 hours Durable water repellent finish Taped seams for complete waterproof protection Part mesh, part recycled polyester taffeta lining Grown on technical hood with adjusters Inner zipped pocket Water repellent centre front zip with inner zip guard & drainage channel 2 lower pockets with water repellent zips Underarm ventilation zips with mesh lining Adjustable cuffs Adjustable shock cord hem Fabric 61% Polyester; 39% Recycled Polyester  

Mountain Equipment Mens Nanda Devi Insulated Jacket

Features 2-layer GORE-TEX 75D fabric. Waterproof, windproof and breathable protection Durable water-repellent (DWR) finish. Enhances waterproof performance and maintains breathability in demanding conditions 80g m⁻² POLARLOFT® synthetic insulation. Reliable warmth in cold, damp conditions Mountain fit. Relaxed fit through body and sleeves Insulated Mountain Hood. Fully adjustable, maximum protection 2 large pockets with YKK® zips and external storm flaps. Weather-protected storage 2-way YKK® Vislon® centre front zip with external stormflap. Vent and layer with ease 2-way YKK® pit zips with external flap. Ventilation without removing layers Adjustable laminated cuffs. Durable, glove-compatible seal Dual-tether hem drawcords. Snag-free, secure adjustment Inner pocket with YKK® zip. Low-profile, secure storage for valuables Material and Construction 100% Recycled Polyester shell, ePE membrane, 100% Polyester fill, 100% Polyamide lining Main: 75D - 104g / 3.1oz; Lining: 20D - 38g / 1.1oz

Mountain Equipment Mens Lhotse Jacket

Weight: 510gFeatures ‘Alpine Fit’ for complete freedom of movement without excess fabric Storm Construction - Mountain Equipment's highest specification construction for weather resistance and durability Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Bonded hem for durability Internal dual tether hem drawcords Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Materials Content: 100% Recycled Polyamide shell, 100% Polyamide backer, ePE Membrane Waterproof, windproof and breathable; GORE-TEX Pro fabric is guaranteed to keep you dry Taped seams throughout to prevent water entry Solution dyed backer

Mountain Equipment Mens Makalu Jacket

Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W

Mountain Equipment Mens Kedar Jacket

Features 3-layer GORE-TEX Active 30D fabric for superior breathability and waterproofing Fully adjustable Mountain Hood that rolls away when not needed Alpine fit with pre-shaped, articulated sleeves for easy movement YKK® WR centre front zip for reliable water resistance Two large ventilated pockets with weather-resistant zips YKK® WR underarm pit zips for fast, on-the-go ventilation Adjustable laminated cuffs and dual tether hem drawcords for a tailored fit Lightweight and packable — ideal for fast-paced mountain adventures  

The North Face Mens Quest Mono Jacket

Features Mesh body lining Brushed-knit back-neck and chin guard lining Exposed centre front zip Three-piece hood with one-point regulation Two zipped hand pockets Adjustable hood and hem Elasticated cuffs Heat transfer logo Intended Use: Hiking Standard fit: This garment is true to size for an easy, comfortable fit. Other Features DWR - Water repellent: A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Fabric and Technology Fabric: 100% Polyester / Woven / Dobby Standard fit: This garment is true to size for an easy, comfortable fit DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable

The North Face Mens Millerton Insulated Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Synthetic fill - Synthetic insulation maintains warmth even in damp conditions. Breathable - Air can easily pass through the fabric in this garment, helping to regulate body temperature. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Synthetic insulated version of our popular Millerton Jacket Adjustable hood with stiffened peak Aadjustable hem Internal chest pocket and hook-and-loop adjustable cuffs Bluesign approved Materials Fabric | DryVent™ 2L–100% Polyester / Woven Centreback | 76,2 cm 

Berghaus Mens RG Alpha 2.0 Jacket

Weight: 598gFeatures Berghaus Hydroshell® fabric is waterproof and breathable, with a storm flap for added protection. The adjustable rollaway hood provides extra weather protection in seconds when needed, and packs away neatly when not. Two lower zipped hand pockets are ideal for storing essentials. Fully adjustable back hem to keep out draughts. Hydrostatic Head - 12,250mm Breathability Rating - 5,063 (g/m2/24hrs) Fabric Fabric: 100% Polyamide / Solid Lining: 100% Polyamide / Mesh Lining: 100% Polyester

Highlander Multi Purpose Poncho

Weight: 220gFeatures Size: 133cm x 205cm Waterproof Vinyl Electronically welded seams Can be used as an emergency groundsheet Lightweight emergency rain protection Material: 100% Polyester

Haglofs Mens Breeze Proof Jacket

Weight: 623gFeatures Waterproof and breathable Adjustable full-coverage hood with brim Two zippered hand pockets Draw-cord adjustable bottom hem Velcro-adjustable cuffs Brushed chin guard Zipper placket Standard fit Recommended For: Lifestyle Materials PROOF 2L plain weave, 100% Recycled Polyester, 75 Denier, Hydrostatic head: 15.000 mm; Moisture Permeability: 15.000 g/m2/24h, PFAS-free DWR, 150g/m2, bluesign® approved, Knitted mesh, 100% Recycled Polyester, 70g/m2, Bluesign® approved., Knitted brushed tricot, 100% Recycled Polyester, 130g/m2, bluesign® approved, Tafetta woven fabric, 100% Recycled Polyester, 75 Denier, 83g/m², bluesign® approved  

The North Face Mens Evolve II Triclimate Jacket

Features Dryvent™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Triclimate® compatible - This product can be combined with other Triclimate®-compatible products for complete weather protection. DWR finish - A durable water-repellent finish provides protection from light moisture and fabric saturation. Waterproof - This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable - Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer. Windproof - This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Recycled material - This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. This three-in-one jacket offers waterproof, breathable protection with a DryVent™ 2L shell and a removable fleece liner Outer jacket: Waterproof, breathable, seam-sealed Brushed knit chin guard and collar lining Centre front closure with a zip and hook and loop Adjustable hood with a bonded brim stows in the collar Two secure-zip hand pockets Shock cord regulation adjustment at the hem Self-fabric cuffs with a hook and loop adjustment Embroidered logo  Durable water-repellent (DWR) finish  Inner jacket: Centre front zip  Two secure-zip hand pockets Elastic binding at the cuffs and hem Embroidered logo Materials & Construction Fabric - Outer Jacket | 111 G/M², 2L DryVent™–100% Polyester Fabric - Inner Jacket | 190 G/M², 100% Recycled Polyester Fleece