Mammut Mens Alto Guide HS Hooded Jacket

Weight: 480 gFeatures 3-layer Mammut DRY Tour laminate for dependable weather protection 100% recycled nylon face fabric Helmet-compatible 1-way adjustable hood with reinforced peak Water-repellent 2-way front zipper Zippered chest pocket 2 backpack and climbing-harness-compatible zipper pockets Underarm zipper for additional ventilation Pre-shaped sleeves with hook and loop fastener Hem width can be adjusted with drawstring Water column: 20000 mm Breathability: 20.000 g/m²/24h Material and Construction Denier (main material): 40Dx40D Main Fabric 1 (B2B): 3L Mammut DRY Tour Backing (B2B): 100% polyester Lining 1 - Face Material (B2B): 100% recycledPolyester Membrane (B2B): 100% polyurethane Main Fabric 1 - Face Material (B2B): 100% polyamide (recycled) Fair Wear bluesign® PRODUCT PFC-free DWR Recycled

Columbia Mens Inner Limits III Jacket

Features Omni-Tech™ fully seam sealed prevents moisture from seeping into every seam while using waterproof-breathable fabric, so you stay completely dry in the rain Crafted with 100% recycled polyester Mesh lined for breathability Drawcord-adjustable hood seals out the elements Chin guard prevents chafing Zippered hand pockets secure valuables Adjustable cuffs for a versatile fit Drawcord-adjustable hem seals out the elements Center Back Length: 29.0 in / 73.7 cm Uses: Hiking, Walking Active Fit: Body skimming fit with end-use mobility in mind Materials Shell: Omni-Tech™ Plain Weave 2L 100% Polyester  Lining: 100% Polyester PFAS-FREE DESIGN: This product was designed without any PFAS (Per- and Polyfluorinated Substances), also known as 'forever chemicals'. Instead, we use a DWR finish that allows your gear to repel water without harming the environment. 

The North Face Mens Fontanales Jacket

Features This jacket meets the water-resistance requirements of most races' mandatory kits Reverse coil zips at the front Bonded chest stow pocket Reflective details Intended Use: Running & training Other Features Recycled material: This product is made with recycled materials, which helps to reduce landfill waste and minimise its impact on nature. Reflective: Light reflection detailing helps you stay visible in low-light conditions. Packable: This piece can be packed into its own pocket to save space. Waterproof: This fabric provides an impenetrable barrier to rain and snow for guaranteed dryness. Breathable: Our unique fabric technology allows air to pass through the fabric, helping to regulate body temperature and keep you cooler for longer.  Windproof: This fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Fabric and Construction Fabric: 100% Recycled Polyester with Non-PFC Durable Water-Repellent (Non-PFC DWR) Finish / DryVent™ / Woven DRYVENT™: Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable.

Mountain Equipment Mens Lhotse Jacket

Weight: 500g Features: Materials Waterproof, windproof and breathable; next gen GORE-TEX with ePE membrane is guaranteed to keep you dry A lighter weight main body fabric keeps the jacket supple and comfortable to wear, and a heavier weight material is used on the yoke and shoulders for greater durability. Main Fabric: 40D GORE-TEX Pro (117gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <7 Reinforcements: 80D GORE-TEX Pro (154gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <7 Taped seams throughout to prevent water entry Solution dyed backer Patterning & Design Using our classic ‘Alpine Fit’ for complete freedom of movement without excess fabric The Lhotse is sized on the assumption that at some point you may need to wear a baselayer, lightweight fleece  other mid-layers underneath it, so worn over just a tee-shirt in summer it may feel a little generous. That said, most people find this ‘true to size’ no matter when or with what they use it, but if you are of slight build and intend to wear only thin layers underneath it then you may need to consider dropping down a size Storm Construction - our highest specification construction for weather resistance and durability Hood Configuration Our Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Internal rear hood adjuster cord channels Seamless face panel with shell fabric facing Internal Cohaesive® cord locks and cord tunnel Rollaway hood tab Pocket Configuration 2 outer hand pockets with YKK® AquaGuard® zips with internal stormflaps, drainage channels and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket with YKK® AquaGuard® zip with internal stormflap, drainage channel and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Fully laminated waterproof pocket construction Stratum pocket construction increases pockets' internal volume Centre Front Zip Full length 2-way YKK® AquaGuard® centre front zip with laser cut internal stormflap Cuffs & Sleeves Configuration Articulated and pre-shaped sleeves are shaped for movement and are comfortable even when reaching up or using trekking poles Adjustable and bonded cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Bonded hem for durability Internal dual tether hem drawcords Further Features Underarm pit zips allow for airflow & ventilation when required Built to last. Backed up by our Manufacturers Lifetime Guarantee

Berghaus Mens RG Alpha 2.0 Jacket

Weight: 598gFeatures Berghaus Hydroshell® fabric is waterproof and breathable, with a storm flap for added protection. The adjustable rollaway hood provides extra weather protection in seconds when needed, and packs away neatly when not. Two lower zipped hand pockets are ideal for storing essentials. Fully adjustable back hem to keep out draughts. Hydrostatic Head - 12,250mm Breathability Rating - 5,063 (g/m2/24hrs) Fabric Fabric: 100% Polyamide / Solid Lining: 100% Polyamide / Mesh Lining: 100% Polyester

The North Face Mens Quest Jacket

Features Waterproof, breathable, seam-sealed fabric Mesh body lining Brushed knit back neck and chin guard lining Exposed centre front zip with a water-resistant finish Fixed hood with one-way hood regulation Two hand pockets with zip closure Shock cord regulation adjustment at the hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish Fabric: 2L DryVent™ Dobby–100% Polyester with Durable Water-Repellent (DWR) Finish  

Craghoppers Mens Lorton Jacket

Features Wind Resistant: The fabric blocks wind from penetrating the garment, greatly reducing the effects of wind chill. Breathable: Lightweight fabrics that help regulate body temperature and keep you comfortable by allowing moisture to escape. Waterproof: Waterproof fabric provides a moisture barrier for guaranteed dryness. Stretch: Stretch fabric provides greater range of motion and ultimate comfort. Stretch AquaDry waterproof & breathable fabric with fully taped seams. Waterproof rating (hydrostatic head): 2 mm Breathability rating: 3 g/m2/24hrs H2OShield plant-based water repellent finish (fluorocarbon free) Zipped security & O/S map pocket to inner Adjustable hem Reflective logos for better visibility Articulated sleeves Technology AQUADRY: Guaranteed waterproof and breathable fabric. Designed for moderate to heavy downpours. 32" length Zipped YKK centre front with stud fastening outer stormflap & inner zip guard Dropped back hem with drawcord adjuster Grown on hood with drawcord adjusters to front & back and peak insert Cuff adjusters Recycled polyester stretch with AquaDry Membrane & H2OShield DWR, polyester stretch mesh & recycled polyester taffeta lining. Recycled zip tape to all but outer pockets. Fabric Main fabric: 100% recycled polyester / Membrane: TPU / Mesh: 100% polyester / Taffeta: 100% recycled polyester  

The North Face Mens Lightning Zip In Jacket

Weight: 510gFeatures: DRYVENT™ - Seam-sealed two and three-layer DryVent™ fabrics are engineered to be waterproof, windproof and breathable. Discover more about DRYVENT™ Adjustable hood Adjustable hem with hidden stoppers Exposed pit zips for ventiliation VELCRO® tab at the cuffs Elbow-shaped seams Secure-zip hand pockets DryVent™ technology Heat transfer logo on the left chest and back-right shoulder Material and Construction: Fabric - Outer Shell : 133 G/M², 100% Polyester / Woven / Plain / DryVent™ Fabric - Lining : 66 G/M², 100% Polyester / Woven / Taffeta    

Mountain Equipment Mens Makalu Jacket

Patterning & Design Alpine Fit with articulated and pre-shaped sleeves allows maximum mobility YKK® WR underarm pit zips allow for airflow & ventilation when required Hood Configuration Our Mountain Helmet Compatible Hood can also be worn comfortably over a helmet when required Hood is fully adjustable with rear volume adjustment and two frontal adjusters Laminated and wired hood visor maintains field of vision even in high winds or when wearing glasses or goggles Tethered external cordlocks to adjust the hood opening Internal rear hood adjuster cord channels with rollaway clip Tricot-lined chin guard Pocket Configuration 2 outer hand pockets with YKK® WR zips and zip garages, positioned to be accessible when carrying a pack or wearing a climbing harness and large enough to store gloves and other items 1 outer chest pocket YKK® WR zip and zip garage, large enough to accommodate a map, GPS or other accessories Single inner YKK® zipped security pocket for storage of small items Waterproof pocket bags Stratum pocket construction increases pockets' internal volume Centre Front Zip Full length 2-way YKK® AquaGuard® centre front zip with internal stormflap Press stud fastener at the hem to eliminate zip riding up Cuffs & Sleeves Configuration Adjustable stitched cuffs Bar tack reinforcement on cuff pull tabs Waist & Hem Construction Stitched hem Dual tether hem drawcords Further Features Built to last. Backed up by Mountain Equipment's Product Lifetime Guarantee Designed and developed in the UK. Manufactured in China Main fabric made by W. L. Gore & Associates in China Materials Waterproof, windproof and breathable; GORE-TEX fabric is guaranteed to keep you dry Main Fabric: 75D GORE-TEX ePE (139gsm). Waterproof breathable 3-layer construction with Gore DWR. HH: 28,000mm, RET: <20 Taped seams throughout to prevent water entry

Mountain Equipment Mens Makalu Jacket

Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W

Mountain Equipment Mens Makalu Jacket

Weight: 550g Features New GORE-TEX with ePE membrane and FC free DWR 3-Layer construction with 75D face fabric for durability Mountain HC Hood is fully adjustable Alpine fit with articulated and pre-shaped sleeves 2 large pockets with YKK® WR zips Napoleon chest pocket with YKK® WR zip 2-way YKK® moulded Aquaguard® centre front zip 2-way YKK® WR underarm pit zips Adjustable laminated cuffs and dual tether hem drawcords Laminated and laser cut inner pocket with YKK® zip CONSTRUCTION GORE-TEX Rain Test Certified 13mm taped seams to prevent water entry Internal centre-front storm guard with fastener Laminated and bonded hanging loop MATERIALS GORE-TEX 3-Layer 75D / 170gsm (Shoulders, Rear Hem & Upper Sleeve) GORE-TEX 3-Layer 50D / 149gsm (Main Body & Hood) 100% Polyester Face, ePE membrane with solution dyed Tricot backer POCKETS Waterproof pocket construction Laser cut and laminated inner pocket HOOD Mountain HC Hood Laminated and wired visor Internal hood adjuster cord channels Nifco cord locks Tricot lined face panel Rollaway hood tab CUFFS & SLEEVES Pre-shaped and articulated sleeves for greater freedom of movement when reaching up / climbing Shaped cuff improves wearability Laminated cuff tab with Velcro Bar Tack Reinforcement – aids directional pull and wont tear off HEM Sewn hem / Adjustable Dual-tether hem drawcords wont snag Nifco Cord Locks ZIPS Centre Front - YKK® Aquaguard® #5 VISLON® zipper with 2-Way non-locking slider and Plastic Head Pockets - YKK® Aquaguard® #3 Coil zipper non-locking slider with metal head Inner Pocket - YKK® #3 Reversed Coil zipper non-locking slider Pit Zips - YKK® #3 Reversed Coil zipper non-locking slider with metal head PERFORMANCE Hydrostatic Head: 28,000mm Breathability: RET - 9m2Pa/W

Berghaus Mens RG Alpha 2.0 Jacket

Weight: 598g WATERPROOF GUARANTEE Our fully breathable and Waterproof Hydroshell® fabric keeps you dry and protected when the weather turns. The centre-front zip is covered for additional Waterproof protection. ADJUST YOUR SETUP Adjustable hood offers enhanced wet weather protection and can be neatly rolled away when not in use. ESSENTIALS IN REACH Keep your vital bits and pieces close at hand using the two hand-warmer pockets.

The North Face Mens Quest Jacket

Weight: 505g Fabric: 75D 110 g/m² 2L DryVent™ - 100% polyester Waterproof, breathable, seam sealed DryVent™ 2L Mesh body lining $$ Brushed knit back neck and chin guard lining Reverse-coil centre front zip with water resistant finish Fixed Hood, with one way hood regulation Two secure-zip covered hand pockets Shock cord regulation adjustment at hood and hem Elasticated cuffs Heat transfer logo Durable water-repellent (DWR) finish